Deck installation, replacement, repair, and refinishing for Pasco homes, built for Eastern Washington heat and dry air.
Proudly Serving Pasco and Surrounding Communities
Trusted Deck Contractor by Local Home Owners and Businesses for 12+ years
Check Out Our Reviews on Google
Trusted Brands. Proven Quality. Better Results.








A deck in Pasco lives through roughly eight inches of rain a year, humidity that drops near twenty-five percent in midsummer, and afternoons that run past 100 degrees. That combination is hard on wood in a specific way. Boards dry fast, cup at the edges, check along the grain, and start throwing splinters years before anything rots. We build and finish decks for that climate rather than a wet-side one, which changes board spacing, fastener selection, and how often a stained surface actually needs recoating.
Most deck work in this area gets picked up by fencing crews and general contractors between larger jobs. We build, repair, and refinish decks, railings, pergolas, and patio covers, and we work Pasco and the surrounding Tri-Cities rather than the whole state. That focus is why we can tell you at the first visit whether your project clears the Pasco permit threshold, and exactly what the Building Division will want to see if it does not.
Decks, railings, pergolas, and patio covers only
Permit scope confirmed before we quote, not after
Material choices made for 100-degree afternoons
Pasco, Kennewick, Richland, West Richland, Burbank, Finley
Proudly serving Pasco, Kennewick, Richland, West Richland, Burbank and Finley for 12+ years.
Ten services, from a full pool deck build down to a railing swap or a season of stain. Every one of them starts the same way: we look at what the structure sits on, how high it stands above grade, and what the sun does to that side of the house through a Tri-Cities summer.

We work Pasco first and five surrounding communities after it. Two of them are unincorporated, which means county permits rather than a city building department, and one runs a municipal electric utility instead of a PUD. Those differences change the sequence, so we sort them out before scheduling.
Deck Contractor solutions can be complex, and we’re here to provide answers to common questions. Here are some frequently asked questions from our clients.
There is no single price for a Pasco deck. Cost follows the square footage, the height above grade, whether the framing underneath can be reused, the decking material, and whether the railing is wood, cable, or aluminum. A ground-level platform in an existing footprint and an elevated deck with new footings are not comparable jobs. We price after a walkthrough and measurements, not over the phone.
It depends on two numbers. Pasco Municipal Code exempts decks under 200 sq ft that also sit under 30 inches above the ground, so a small ground-level platform can go in without a permit. Cross either threshold and you need one from the City of Pasco Building Division, where residential permits run a five to seven business day review. We confirm which side of that line your project falls on before quoting it.
For a Pasco summer, the honest answer is that surface color matters more than material category. Lighter boards run cooler underfoot than dark ones, in composite and in wood alike. Composite avoids the annual splintering and checking that dry heat causes in softwood, while a good hardwood or cedar stays cooler than most dark composites. We match the material to how the deck is oriented and how often it is used barefoot.
Ask three things. Whether they build decks specifically or take them alongside fencing and general contracting, whether they will tell you the permit threshold before quoting, and whether their past work is in your climate rather than on the wet side of the state. A crew that cannot answer the permit question in the first conversation has not looked at your project yet.
Schedule follows the permit review, the footing and framing inspections, whether concrete has to cure before framing starts, and lead times on decking and railing. A railing replacement on sound framing and a new elevated deck that needs fresh footings sit at opposite ends of that range. We give you the sequence in writing so you can see which steps are ours and which belong to the city.
Wood is cheaper up front and needs a finish schedule. Composite costs more at install and skips the stripping and staining. In this climate the gap widens, because dry heat and hard sun push a softwood deck toward recoating more often than the same deck would need on the coast. The right choice depends on whether you would rather spend the money once or spread it across seasons of maintenance.
Plan Your Pasco Deck Project
We pride ourselves on delivering great results and experiences for each client. Hear directly from home and business owners who’ve trusted us with their Deck Contractor needs.
Ready to hear more about expert services at Pasco Deck Contractors?
Contact us today to receive a detailed, no-obligation quote.
Serving West Pasco, Riverview, Road 68, Chapel Hill, Broadmoor, Downtown Pasco & Greater Pasco
Mon–Fri 7AM–5PM | Sat 8AM–3PM | Sun Closed